One-Touch Image Menu; Changing The Menu Location - Yamaha DPX-1 Manual De Instrucciones

Menu operation
I One-touch image menu
1.
Press the SELECT button to open the one-touch
image menu when the menu has not been opened.
The image menu items appear at the bottom of the screen one
after another. The previous parameter appears once menu
operation has been performed.
The displayed item turns off if no operation is performed
within five seconds.
SELECT
Remote control
BLACK LEVEL
2.
Select the item to be adjusted by pressing the h and
g button.
SELECT
Remote control
CONTRAST
3.
Select the value by pressing the + or – button.
SELECT
Remote control
CONTRAST
Press the RESET button to reset the parameter to the factory
setting.
4.
Press the SELECT or ESCAPE button to close the
one-touch menu.
ESCAPE
SELECT
or
Remote control
24
E-
SELECT
or
Control panel
0
or
Control panel
0
or
Control panel
100
ESCAPE
Control panel
I Changing the menu location
1.
Press the ESCAPE or h button to return the cursor to
the menu group.
ESCAPE
SELECT
Remote control
IMAGE
INSTALLATION
SCREEN ASPECT
KEYSTONE
KEYSTONE MODE
R/C SENSOR
2.
Press the h button to enter the "MOVE MENU WIN-
DOW".
SELECT
Remote control
ESCAPE: EXIT
3.
Change the location of the menu by pressing the +, –,
h, or g button.
SELECT
SELECT
Remote control
4.
Press the ESCAPE button to return to the menu after
the location has been decided.
ESCAPE
Remote control
ESCAPE
or
Control panel
MOVE MENU WINDOW
SIGNAL INITIAL SETUP
FRONT/TABLE
4:3 16:9
0
NORMAL FULL
FRONT&REAR
MEMORY1 VIDEO
or
Control panel
MOVE MENU WINDOW
SETUP
MEMORY1 VIDEO
or
Control panel
ESCAPE
or
Control panel