Connecting The Speakers - Pioneer GM-D9605 Manual De Instrucciones

Section
Connecting the units
03
Notes
! For details on the speaker output, refer to Con-
necting the speakers on page 10.
! When the 2CH-4CH INPUT SELECT (input se-
lect) switch is set to 2CH, do not connect any-
thing to RCA input jack B.
CH-A CH-B CH-SW input
! Slide the 2CH-4CH INPUT SELECT (input
select) switch to the 4CH position.
! Slide the A/B-SW INPUT SELECT (input se-
lect) switch to the SW position.
Connection when using the RCA input jack
Connection when using the SP INPUT (speaker
input) terminal
10
En
Notes
! When connecting the amplifier using the
SP INPUT (speaker input) terminal, do not
connect anything into RCA input jack A or B.
! For details on the speaker output, refer to Con-
necting the speakers on page 10.

Connecting the speakers

The speaker output mode can be five-channel
output or three-channel output.
Connect the speaker leads based on the mode
and the figure shown below.
Five channel output
5
1 Left
2 Right
3 Speaker output A
4 Speaker output B
5 Subwoofer output
2
3
1
2
4
1