Cleaning The Humidity Filter; Cleaning The Water Collecting Tray; Cleaning The Ice Cube Container; Light - Bosch 4 Serie Manual De Uso

Clean the surface of the
appliance with a soft damp cloth
and a little washing-up liquid.
Afterwards, rub dry.
After cleaning: reconnect and
switch on the appliance
Cleaning the humidity
filter
Cleaning the water
collecting tray
Spilled water collects in the water
collecting tray.
To empty and clean, remove the
filter. Wipe out water collecting tray
with a sponge or absorbent cloth.
Cleaning the ice cube
container
If ice cubes have not been
dispensed for a prolonged period,
they will shrink, have a stale taste
and stick together.
Pull out the container, empty
and clean with lukewarm water.
m
CAUTION
A full-filled ice cube container is
very heavy. To avoid risk of injury,
use caution when removing the
ice cube container!
Thoroughly dry the container
and screw conveyor to prevent
new ice cubes from sticking.
Inserting the ice cube container:
Push the ice cube container all
the way back onto the supports
until it locks into position.
If the container cannot be
pushed all the way back, twist
the screw conveyor in the
container.
Ice cube production continues.

Light

(depending on model)

LED light

Your appliance features
a maintenance-free LED light.
m
m
CAUTION
Class 1M laser lighting (IEC 60825).
To avoid risk of eye injury, do not
look directly into the lighting with
optical instruments!
These lights may be repaired by
customer service or authorised
technicians only.
Changing the bulbs in
the refrigerator and
freezer compartments
m
WARNING
Risk of electric shock!
To avoid electrical shock which
can cause death or severe
personal injury, disconnect
power to appliance before
making repairs.
After making repairs, reconnect
power.
m
m
21