Safety Instructions For Operation; Personal Protective Equipment; Vibration Safety - Husqvarna K 7000 Chain Manual Del Usuario

Ocultar thumbs Ver también para K 7000 Chain:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not operate the product if it is possible that other
persons have done modifications to the product.
Always use original accessories and spare parts.
Accessories and spare parts that are not approved
by the manufacturer, can cause serious injury or
death.
Keep the product clean. Make sure that you can
clearly read signs and decals.
Never allow children or other persons not trained in
the use of the product to use or service it.
Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
Only let approved persons operate the product.
This product produces an electromagnetic field
during operation. This field can under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
The information in this operator's manual is never a
substitute for professional skills and experience. If
you are in a situation where you feel unsafe, stop
and get expert advice. Speak to your servicing
dealer. Do not try any task that you feel unsure of.

Safety instructions for operation

WARNING: Read the warning instructions
that follow before you use the product.
Before you use a power cutter, you must understand
the effects of kickback and how to prevent them.
Kickback on page 11 .
Refer to
Do the safety checks, maintenance and servicing as
given in this operator's manual. Some maintenance
and servicing must be done by an approved service
Maintenance schedule on page 18 .
center. Refer to
Do not use the product if it is defective.
Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine. These
conditions can have an unwanted effect on your
vision, alertness, coordination or judgment.
Sparks from the diamond chain can cause fire in
flammable materials such as gasoline, gas, wood,
clothes and dry grass.
Do not cut asbestos material.

Personal protective equipment

WARNING: Read the warning instructions
that follow before you use the product.
Always use approved personal protective equipment
during operation. Personal protective equipment
cannot eliminate the risk of injury but it will reduce
1455 - 003 - 03.03.2020
the degree of injury if an accident does happen. Ask
your servicing dealer for help in choosing the right
equipment.
Use an approved protective helmet.
Use approved hearing protection. Long-term
exposure to noise can result in permanent hearing
impairment. Be aware of warning signals or shouts
when you are wearing hearing protection. Always
remove your hearing protection as soon as the motor
stops.
Use approved eye protection to decrease the risk of
injury from thrown objects. If you use a face shield
then you must also wear approved protective
goggles. Approved protective goggles must comply
with standard ANSI Z87.1 in the USA or EN 166 in
EU countries. Visors must comply with standard EN
1731.
Use heavy duty gloves.
Use approved respiratory protection. The use of
products such as cutters, grinders, drills, that sand or
form material can generate dust and vapours which
may contain hazardous chemicals. Check the nature
of the material you intend to process and use
appropriate breathing mask.
Use tight-fitting, heavy-duty and comfortable clothing
that permits full freedom of movement. Cutting
generates sparks that can ignite clothing. Husqvarna
recommends that you wear flame-retardant cotton or
heavy denim. Do not wear clothing made of material
such as nylon, polyester or rayon. If ignited such
material can melt and cling to the skin. Do not wear
shorts.
Use boots with steel toe-cap and non-slip sole.
Always keep a first aid kit near.
Sparks can come from the diamond chain. Always
have a fire extinguishing available.

Vibration safety

WARNING: Read the warning instructions
that follow before you use the product.
During operation of the product, vibrations go from
the product to the operator. Regular and frequent
operation of the product can cause or increase the
degree of injuries to the operator. Injuries can occur
in fingers, hands, wrists, arms, shoulders, and/or
7

Publicidad

Tabla de contenido
loading

Tabla de contenido