Maintenance Table - Husqvarna TF545P Manual De Usuario

Forward
3• 1
It is essential to let ou the
clutch before using reverse
Maintain a safety zone of
20 m in radius around the
machine
Tiller working direction with accessories
3• 3 and gear control
Stopping the
rotating tools
4• 1
Release the clutch lever.
Putting the
shifting lever to •N•
4• 2
Daily check
Before starting the engine, check the
following points.
 There must be no loosened or
broken nuts or bolts.
 Cleanliness of the
air filter element
4• 2
Do not use inflammable
solvent to clean the foam
air filter element.
 Check lub. oil
2• 1 2• 2
 No leaks of petrol or lub.
 Sufficient petrol
2• 1
 Keep the machine clean.
 Environment protection.
 No abnormal vibrations
excessive noise.
USE
Reverse
3• 2
It is essential to let ou the
clutch before using reverse
Maintain a safety zone of
20 m in radius around the
machine
STOPPING
Reduce the throttle
4• 1
Set the throttle control to:
Stopping the engine
4• 1
Set the on/off switch to OFF

MAINTENANCE TABLE

After the first 20 hours of every month
 Change the lub. Oil of engine and gearbox.
 Clean the air filter * (2 Fig. 4.6).
Every 100 hours or every 6 months
 Clean the fuel filter.
 Change the lub. Oil of engine and gearbox.
 Clean the spark plug.
 Clean the spark plug cap.
level
 Replace the air filter *.
 Check the play in the valve * *.
 Replace the spark plug.
 Clean the fuel filter * *.
 Clean combustion chamber * *.
 Check the fuel circuit * *.
or
* Clean more often in condition of use where the air is dusty or laden with aerial debris.
* * Not essential except in the event of performance problems (to be conducted by a Husqvarna workshop).
Every 50 hours of every 3 months
Every 300 hours or once a year
The use of
dangerous.
Ensure that there are no
obstacles behind you and
reduce the engine
begore engaging the clutch
Close the fuel nap
4• 1
reverse is
revs