Replacement Of The Oven Light - Fulgor Milano SUPREME SO 6115 Instrucciones Para La Instalación Y Uso

Replacement of the oven light

Make sure that:
• The oven and lights are cool and power to the oven has been
turned off before replacing the light bulb(s). Failure to do so
could result in electrical shock or burns.
• The lenses must be in place when using the oven.
• The lenses serve to protect the light bulb from breaking.
• The lenses are made of glass. Handle carefully to avoid
breakage. Broken glass could cause an injury.
1 Turn off power at the main power supply (fuse or breaker box).
2 Remove the lens (1) by unscrewing it.
3 Remove the light bulb (2) from its socket (3).
4 Replace the bulb (2) with a new one. Avoid touching the bulb with fingers, as oils from
hands can damage the bulb when it becomes hot.
5 Use one with the same Volt and Watt (see Fig. 12).
6 Screw the lens (1) back on.
7 Turn power back on at the main power supply (fuse or breaker box).
WARNING
1
(230V - 15 or 25W)
2
1
Fig. 12
3
GB
25