Operational Safety Instructions (cont)
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
CAUTION:
ImPORTANT:
ImPORTANT:
The Company has obtained applicable code (standards) listings generally available
on a national basis for products of this type. It is the responsibility of the
installer/owner to determine specific local code compliance prior to installation of the
product. The Company makes no representation or warranty regarding, and will not
be responsible for any code compliance. Product specifications are subject to
change without notice.
Page 6
The use of alcohol, drugs or medication can greatly increase
the risk of fatal hyperthermia. People using medications or
having an adverse medical history should consult a physician
before using a hydromassage bathtub equipped with a heater.
Do not tamper with user-operated controls or such devices.
Use this unit only for its intended use as described in this
manual. Do not use attachments not recommended by the
manufacturers.
To avoid injury, exercise caution when entering or exiting the
hydromassage bathtub.
Do not use hydromassage bathtub unless all suction guards
are installed to prevent body and hair entrapment. Never
operate the hydromassage bath if the suction cover is broken,
damaged or missing.
Water temperature in excess of 104°F (40°C) may be injurious
to your health. Check and adjust water temperature before use.
Test the ground fault circuit interrupter protecting this appliance
periodically in accordance with manufacturer's instructions.
Read the complete instructions provided in this manual before
beginning installation.
For optimal operation, the water level must remain at 1˝ to 2˝
(25mm to 50mm) above the highest jet; do not use oil-based
bathtub additives in your hydromassage bathtub.
www.jacuzzi.com
Espree™ Bathtub Series
Installation and Operation