Stored Imprints; Selecting Imprint - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790/790 MP

1.5. Stored imprints

Number P : 01 to P : 25 are pre-set imprints (see "Overview of saved imprints", page 60),
which contain individual print fields such as "text prefix" (see page 62), "numberer" (see
page 64), "time" and "date" (see page 71) and must be set before stamping.
A "Pretext" can be selected from 12 standard texts (see page 62). The contents of the
displayed imprints are just examples and can be changed.
Numbers P : 26 to P : 29 are customer-specific imprints that can be created individually
(see page 69).
The active imprint is shown in the top left of the display, e.g. P : 09.

1.6. Selecting imprint

In order to make adjustments to the imprints, they have to be selected and activated first.
Press [MODE] until [NEXT] appears in the display menu bar.
f
Press [NEXT] until the required P : number appears.
f
Other options for selected imprints:
- Favourites (see page 68).
- Setup-Module under "STAMP PICTURE" (see page 70).
GB
59