Setting Time And Date; Insert Cartridge; Selecting Language - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790/790 MP

1.2. Setting time and date

See "Setting time and date", page 71.
f

1.3. Insert cartridge

When using special ink (MP), observe the notes in the operating instructions.
CAUTION
Health risks if ink is swallowed.
Don't swallow!
f
Keep cartridge out of the reach of children!
f
Insert cartridge
Remove the jetStamp 790 from the charging station
f
Press [MODE] until [INKJET] appears in the display menu bar.
f
Press [INKJET].
f
The print carriage moves into a central position.
Push the locking rail
f
Take the new cartridge
f
from nozzles
When using standard ink hold the small felt pad
f
14
nozzles until some ink appears on the felt.
Holding the cartridge handle
f
Pull the locking rail
f
Press [INKJET].
f
The print carriage moves to the stamping position.

1.4. Selecting language

See "Selecting language", page 73.
f
58
Fig. A + C + E

10
as far back as it will go.
13
from its packaging and remove the protective film
14
or clip.
9
, insert the cartridge
10
forward again until it locks into place.
4
.
15
that is provided, against the cartridge
13
into the print carriage.
16