Playing Preset Radio Stations - Sony MJ-L1 Manual De Instrucciones

continued
5
Turn the JOG dial until the desired
character appears in the display.
The selected character flashes.
PRESET
VOLUME
To enter a space quickly
Press ) while the cursor is flashing.
6
Press ) .
The cursor shifts rightward and stands
by for the input of the next character.
PRESET
VOLUME
7
Repeat steps 4 and 6 until you have
entered the entire title.
If you want to enter the same character,
skip step 4.
If you entered the wrong character
Press ) or 0 until the character to
be corrected starts flashing, and repeat
steps 4 to 6 to enter the correct character.
To erase a character
Press ) or 0 until the character to
be erased starts flashing, then press
EDIT/NO.
8
Press ENTER/YES.
This completes the assigning procedure
and the name appears in the display.
To erase the station name
You can erase the station name by changing
all the characters of that name into
"spaces".
To change the display
Press DISPLAY.
Each time you press the button, the
frequency or station name (if you have
stored one) appears in the display
repeatedly.
Playing Preset Radio
Stations
Once you have preset the stations, use the
JOG dial to quickly tune in your favourite
stations.
POWER m ON
2
3
1
Press TUNER/BAND repeatedly to
select the band you want.
F M ˜ A M
2
Press TUNING so that "PRESET"
appears in the display.
3
Turn the JOG dial (or press PRESET
(–/+) on the remote ) to tune in a preset
station.
The station frequency appears and the
system begins receiving the stations.
› –
Go to previous Go to next
preset station preset station
PRESET
MD
VOLUME
Frequency Preset number
To select a station directly
After step 1 above, you can quickly tune in
your favourite stations preset on channel
numbers 1 to 10 by pressing the correspond-
ing numeric buttons.
When, you select channel numbers greater
than 10, press >10 first, then enter the
corresponding digits.
Example:
To select channel number 25, press >10,
2 and 5 in this order.
1
Chapter 6: the Radio
GB
24