Preparing Your Device; Cleaning And Maintenance; Replacing The Fuse - HQ-Power HQHZ10003 Manual Del Usuario

6. Operation
6.1

Preparing Your Device

1. Make sure the device is switched off.
2. Unscrew the cap of the tank.
3. Verify that the plastic hoses attached to the cap are in place and in good condition.
4. Pour fluid into the tank and close. Make sure the plastic hose entering the smoke machine from the
fluid tank is not bent or kinked.
5. Connect the device to the mains, switch it on and let it warm up.
6.2 Using Your Device
1. Prepare your device as described above.
2. Press the manual activation button to output fog/smoke. Release the button to stop the fog/smoke
output.
3. Switch off and disconnect from the mains after use. We also recommend emptying the tank before
storing.
7.

Cleaning and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
Cleaning

Use a soft cloth to wipe off the outside casing.

Always be sure to dry all parts completely before plugging the device back in.

Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,
dust, dew).

Do not immerse the device in any liquid.
Maintenance

All screws should be tightened and free of corrosion.

The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...

Mechanically moving parts must not show any signs of wear and tear.

The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.

There are no user-serviceable parts, apart from the fuse and the lamp.

Refer to an authorized dealer for service and/or spare parts.
7.2

Replacing the fuse

1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
3. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder. Pry the fuse out of the
housing.
4. Replace with an identical fuse.
5. Insert the fuse holder back in its place and reconnect power.
V. 02 – 30/10/2017
HQHZ10003
5 ©Velleman nv