Keypad Description; Keyboard Description; Operating The Scale - Baxtran ARD Manual De Usuario

ES FR ENG
1. Zero status indication. Displayed when the scale is at the centre of its zero band.
2. Tare status indication. Displayed when the weight has been tare.
3. Simple counting indication. Displayed when the scale is in simple counting mode.
4. Unit indication. Displayed when the scale is in kg or lb unit.
5. Kg indication. Displayed when the scale is in kg unit.

1.5. KEYPAD DESCRIPTION

ZERO KEY. In the menu use as "UP" key.
When the weigh pan is empty (free of load) and the display is not showing zero, press the
"ZERO" key to zero the scale. (The weight can be zero is only at the 2% of Max. capacity)
TARE KEY. In the menu use as "RIGHT" key.
The tare function will not operate during the following conditions:
1. When the scale powers on if the weight is negative and after a container is placed on the
weigh pan if the weight is still below zero.
2. The tare value is over the full scale capacity.
UNIT KEY. Use this key to switch between kg and g or lb units.
FUNCTION KEY. Use this key to choose the functions: Simple counting, Check weighing,
Accumulation.
PRINT KEY. In the menu use as "CONFIRM" key.
Use this key to print data when the printer is connected.

1.6. OPERATING THE SCALE

SIMPLE COUNTING MODE
1. Press key once, display shows "PCS 10"
2. Press key to choose sample numbers from 10, 20, 50 to 100 pcs, then place the number of samples
on the weighing pan. The number should match the options for parts counting. i.e., 10, 20, 50, 100, 200
pieces.
3. Then press key to start the simple counting mode.
4. Press key to check the unit weight and total weight, display will shows unit weight and shows total
weight then back to simple counting mode.
5. Press key to exit simple counting mode and move back to weighing mode.
HOLD WEIGHING MODE
1. Press key three times, display shows "Hold"
2. Press key to start the HOLD mode.
3. When choose this mode, user needs to press
stable.
4. Take off the object and press
5. Press key to exit HOLD mode and move back to weighing mode.
ACCUMULATION MODE
1. Press key four times, display shows "A C C"
2. Press key to conÀ rm.
Manual accumulation
When choose this mode, user needs to press
28
key after the objects are put on pan and the scale is
key the until back to zero.
key after the objects are put on pan and the scale is stable
ARD
Manual de usuario