Power Supply; Advanced Functions; Checking Battery Voltage; Auto Backlight Setup - Baxtran ARD Manual De Usuario

ARD
to accumulate the data; take off the object and wait until zero, then put other object to continue accumu-
late data.
key to overview the total accumulated numbers and total accumulated weight; display will shows
Press
total accumulated numbers then shows the total accumulated weight.
Scale will back to accumulation mode after showing the total accumulated numbers and weight.
Press key to exit accumulation mode and move back to weighing mode.

1.7. POWER SUPPLY

POWER SELECTION
_ 6V4Ah rechargeable battery
_ 110V or 220V AC/DC adaptor
POWER CONSUMPTION
_ Approximately DC 17mA (Scale)
_ Approximately DC 37mA (Scale + Display backlight)

2.1. CHECKING BATTERY VOLTAGE

When scale is on and at zero and stable, long press
the key, display sill shows the battery voltage for 3 seconds ten back to weighing mode.
2.2. AUTO BACK LIGHT SETUP
When scale is on and at zero and stable, long press
enable or disable. Then press

2.3. AUTO OFF SETUP

When scale is on and at zero and stable, long press
or disable.
Then press key to conÀ rm and back to weighing mode.
Mode "on" – scale will turn off after 10 minutes haven't been use; to be able to use the scale, needs to
turn on the on/off switch.
Mode "off" - Function disable.

2.4. DIVISION SETUP

When scale is on and at zero and stable, long press
the divisions.
Then press key to conÀ rm and back to weighing mode.

2.5. CONFIGURATION OF DATE AND HOUR

The user must keep pressed at the same time the keys
Press the key to view the Year, the Month, the Day, the Hour, the Minute, the Second, etc.
At this moment, press the key
Modifi cation mode: When the hour starts to blink, change data, and press the key
and go to the checking mode.
Manual de usuario
key around 3-5 seconds (beeper sounds) then release
key enter the auto back light setup, use
key to conÀ rm and back to weighing mode.
key enter the auto off setup, use
key enter the division setup, use
, to go to the checking modes and modiÀ cation ones.

2. ADVANCED FUNCTIONS

and to go to the next parameter.
ES FR ENG
key to
key to enable
key to select
to save the changes
29