7 - Ensure that the bead at 180° with respect to
the tool is in the well, otherwise use the bead
pressing tool to facilitate positioning (Fig. 37F).
8 - Turn the selector
9 - Keeping the selector turned
the pedal
the upper part of the tyre from the rim.
If necessary, operate the control
raise the head and complete top bead removal.
10 - Release the selector
11 - Withdraw the movable tool from the work area
.
12- Operate the lever
lower part of the wheel (Fig. 37H).
Artiglio Master J Operator manual
37C
(see Fig 37G).
to turn the turntable and demount
and the pedal
to move the head to the
37D
, press
to slightly
A
37E
37F
37G
37H
135
EN