Corghi Master J Manual De Uso página 144

2. Remove the valve core if it has not already been removed (Fig. 41A).
3. Connect the air hose Doyfe inflator union to the valve stem (Fig. 41B).
4. Pull the tyre up slightly in order to reduce the space between the upper bead and the
rim (Fig. 41C).
5. Fully press down on the inflation pedal
tons on the accessory to emit a jet of high pressure air from the four jets, which make
it easier to position the tyre beads (Fig. 41D).
To increase the effectiveness of the air jets, manually lubricate and lift the lower
bead before activating the nozzles
144
41A
41C
WARNING
and at the same time, press the 2 but-
Artiglio Master J Operator manual
41B
41D