Corghi Master J Manual De Uso página 141

Press the pedal to inflate the tyre and make the beads adhere. Stop frequently to check
the internal tyre pressure on the pressure gauge.
Take care to avoid any injuries. Carefully read, understand and observe the following
instructions.
1. Tyres that are excessively inflated could explode, causing
the dispersion of debris in the air, which can cause accidents.
2. Tyres and rims that do not have the same diameter do not
correspond. Do not attempt to mount or inflate tyres with
rims that do not correspond. For example, never mount a
16" tyre on a 16.5" rim, (or vice versa). It is very dangerous.
Tyres and rims that do not correspond could explode,
causing accidents.
3. Never exceed the inflation pressure for the tyre indicated
by the manufacturer on the side of the tyre itself.
Carefully check that the air hose is well inserted in the valve.
4. Never bring your head or other body parts close to a tyre during inflation or bead
insertion operations.
This machine is not a safety device against the possible explosion risk of tyres, air
chambers or rims.
5. Maintain a suitable distance from the tyre changer while inflating. Do not approach it.
During this operation, noise levels assessed at 85 dB(A) may occur.
Therefore operators are advised to wear hearing protection devices.
RISK OF EXPLOSION: The breakage of a pressurised rim or tyre could cause an
explosion that projects the wheel to the side or upwards with a force that could cause
damage, serious injuries or even death!
Do not mount tyres on rims without first checking the exact correspondence of the
dimensions (printed on the rim and tyre) and for the presence of defects or damage.
This tyre changer is NOT a safety device and does not eliminate risks and damage
from a possible explosion. Do not permit other people to approach the work area.
Artiglio Master J Operator manual
WARNING
WARNING
DANGER
EN
141