Features; Product Specifications - Ryobi TSS121 Manual Del Operador

PRODUCT SPECIFICATIONS

Arbor Hole ..........................................................................1 in.
Blade Diameter .................................................................12 in.
No Load Speed ..............................................3,800/min (RPM)
Input ..............................................120 V, AC only, 60 Hz, 15 A
Cutting Capacity with Miter at 0°/Bevel 0°:
Maximum nominal lumber sizes .............. 2 x 14 in., 4 x 6 in.
Cutting Capacity with Miter at 45°/Bevel 0°:
Maximum nominal lumber size ...............................2 x 10 in.
SLIDE BAR
SLIDE
LOCK KNOB
FENCE KNOB
WORK
CLAMP
SLIDING
MITER FENCE
"NO HANDS ZONE"
BOUNDARY LINE
TABLE
EXTENSION

FEATURES

DUST BAG
UPPER BLADE
GUARD
"NO HANDS
ZONE" LABEL
POSITIVE
STOP(S)
Cutting Capacity with Miter at 0°/Bevel 45°:
Maximum nominal lumber size ...............................2 x 14 in.
Cutting Capacity with Miter at 45°/Bevel 45°:
Maximum nominal lumber size ...............................2 x 10 in.
Cutting Capacity for Crown Molding (Nested):
Maximum lumber size .............................................. 5-1/4 in.
Cutting Capacity for Baseboards Against the Fence:
Maximum height ............................................. 5-1/2 x 3/4 in.
"D" HANDLE
MITER
SCALE
SUPPORT FOOT
DETENT RELEASE LEVER
9 − English
TRIGGER
LOCKOUT LEVER
SWITCH
TRIGGER
LOWER BLADE
GUARD
MITER
TABLE
BASE
THROAT
PLATE
CONTROL
ARM
MITER
LOCK HANDLE
LED
SWITCH
BLADE
WRENCH
Fig. 1