Using The Digital Jog Break; Using Jog Memory Play - Pioneer EFX-1000 Manual De Instrucciones

Ocultar thumbs Ver también para EFX-1000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

QUICK OPERATION GUIDE (3/3)
DEPTH dial
Sets the parameter
1 of each effect.
MIX dial
Adjusts the balance between
the original sound and effects.
CHARACTER dial
Sets the parameter 2 of each
effect.
8
<DRB1368>
DIGITAL JOG BREAK METER
Indicates the amount of control
exercised by the Jog dial.

USING THE DIGITAL JOG BREAK

1. Select the desired effect.
Press the desired effect button, JET, WAH,
PHASE SHIFTER, RING, ZIP, HUMANIZER or
VOCODER to flash the corresponding button.
2. Apply the desired effect.
Turn the Jog dial either while pressing the
lever towards you or pressing it away
from you (ON position). As the Jog dial is
turned, parameters change gradually and
the selected effect is applied. When the
dial rotation is stopped, the parameter
returns to normal.
When the lever is pressed towards you,
releasing it causes it to automatically
return to the center (OFF position).
HOLD button
When this button is pressed so that
the button indicator lights, effects
produced with the Jog dial will
continue even when your hand is
removed from the dial.

USING JOG MEMORY PLAY

1. Hold the Jog memory button (M)
depressed while rotating the Jog dial.
Effect changes produced with the Jog dial will be
stored in memory (maximum 8 seconds). When
storage is completed, the SINGLE and LOOP
buttons light.
2. Press the SINGLE button or LOOP
button
÷ When the SINGLE button is pressed, the
stored Jog-dial effect change will be replayed
one time only.
÷ When the LOOP button is pressed, the stored
Jog-dial effect change will be replayed
repeatedly. Press the button once more to stop
the effect.
www.audiovias.com

Publicidad

Tabla de contenido
loading

Tabla de contenido