Digital Jog Break - Pioneer EFX-1000 Manual De Instrucciones

EFFECTS (Digital Jog Break)

Digital Jog Break

1. JET effect
A time-shifted sound is applied to the
original, thus producing the effect of a jet
airplane ascending or descending (flange
effect).
÷ The Jog dial is used to change the
frequency range that is affected by the
flange effect.
Flange effect change
REV
Jog dial
÷ The amount of resonance is changed
using the DEPTH dial to emphasize the
flange effect. (When approaching the
[MAX] setting, the level of the sound
increases.)
÷ The CHARACTER dial can be used to
adjust the reverb effect.
Reverb
Jet block
block
÷ The MIX dial can be used to adjust the
levels of the jet + reverb sound and
original sound.
2. WAH effect
The filter's cutoff frequency is shifted,
causing great change in the sound tone.
÷ The Jog dial is used to vary the filter's
cutoff frequency.
Jog dial
Jog dial
÷ The DEPTH dial is used to change the
unique coloring of the sound by
adjusting the amount of resonance.
(When approaching the [MAX] setting,
the level of the sound increases.)
DEPTH
MIN
DEPTH
DEPTH
MAX
÷ The CHARACTER dial can be used to
adjust the reverb effect.
Reverb
Wah block
block
÷ The MIX dial can be used to adjust the
levels of the wah + reverb sound and the
original sound.
14
<DRB1368>
3. PHASE SHIFTER effect
A phase-shifted sound is added to the
original, thus producing a phase shifter
effect.
÷ The Jog dial is used to change the
frequency range that is affected by the
phase effect.
REV
FWD
÷ The amount of resonance is changed
using the DEPTH dial to emphasize the
phase effect. (When approaching the
[MAX] setting, the level of the sound
increases.)
÷ The CHARACTER dial can be used to
adjust the reverb effect.
Phase shifter
block
÷ The MIX dial can be used to adjust the
levels of the phase shifter + reverb
sound and the original sound.
4. RING modulator effect
By modulating the original sound in the
shape of a sine wave, the resulting sound
coloration resembles a ringing bell.
÷ The Jog dial is used to vary the sine
wave frequency.
Frequency
REV
÷ The DEPTH dial can be used to adjust
Frequency
the amplitude of the sine wave.
÷ The CHARACTER dial can be used to
adjust the reverb effect.
Ring block
÷ The MIX dial can be used to adjust the
levels of the ring + reverb and original
sounds.
Frequency
5. ZIP effect
Frequency
The Jog dial is used to change the pitch.
Up (about 1 octave)
Frequency
'
Original
Pitch
'
Down
(about 15 octaves)
Phase effect change
FWD
Jog dial
Reverb
block
FWD
Jog dial
Reverb
block
sound
FWD
REV
Jog dial
www.audiovias.com
÷ The DEPTH dial can be used to adjust
the Jog dial's variable range (step).
REV
Jog dial
÷ The CHARACTER dial can be used to
adjust the reverb effect
Reverb
Zip block
block
÷ The MIX dial can be used to adjust the
levels of the zip+reverb and original
sounds.
6. HUMANIZER effect
The original sound is modified to resemble
the vowel sounds of the human voice.
÷ The Jog dial is used to vary the vowel
sound coloration.
REV
Jog dial
÷ The DEPTH dial is used to change the
unique coloring of vowel sounds by
adjusting the amount of resonance.
(When approaching the [MAX] setting,
the level of the sound increases.)
÷ The CHARACTER dial can be used to
adjust the reverb effect.
Humanizer Reverb
block block
÷ The MIX dial can be used to adjust the
levels of the humanizer + reverb and the
original sounds.
7. VOCODER effect
The input sound is replaced by an inter-
nally generated signal sound, producing a
mechanical sound effect.
÷ The Jog dial is used to change the
frequency of the internally generated
signal sound.
÷ The DEPTH dial can be used to vary the
internally generated sound from the basic
sound to a chord. (The sound more nearly
approximates the chord as the adjustment
approaches the [MAX] setting.)
÷ The CHARACTER dial can be used to
change chords codes. Selectable codes
include Minor (MIN), Minor7, 7, Major
(center position), Major7, Sus4, and Add9
(MAX).
Vocoder
block
÷ The MIX dial can be used to adjust the
levels of the vocoder and original sounds.
DEPTH DEPTH
MIN MAX
FWD
FWD