Keypad Features Tp600 Series - Stryker T/PUMP Serie Manual Del Operador

KEYPAD FEATURES TP600 SERIES

Indicator/
Warning Light
Setpoints
On/Standby
Button
www.stryker.com
Features
Figure 3: TP600 Series Keypad
See the Troubleshooting section on
Water Flow
Check hoses and clamps for kinks or occlusions.
Water Level
Check water level.
Press the button at the bottom of the setpoint indicator to
toggle through the three setpoints.
High Heat is 107°F (42°C).
Low Heat is 100°F (38°C).
Cooling is 50°F (10°C).
Green indicates the unit is on.
Yellow indicates power is supplied to the unit but the unit
is not on.
101515 REV C
page 1-15.
1-9