Filling Chain Oil Tank - Stihl HT Manual De Instrucciones

English

Filling Chain Oil Tank

NOTICE
A full chain oil tank is sufficient for only
half a tankful of fuel. Check the oil level
regularly during cutting work. Never
allow the oil tank to run dry.
Preparations
Thoroughly clean the tank cap and
N
the area around it to ensure that no
dirt falls into the tank.
Position the machine so that the
N
tank cap faces up.
18
Opening
Raise the grip until it is upright.
N
Turn the cap counterclockwise
N
(about a quarter turn).
Marks on tank cap and oil tank must line
up.
Remove the tank cap.
N
Filling the Chain Oil Tank
Fill the tank with chain oil.
N
Take care not to spill chain oil while
refilling and do not overfill the tank.
Closing
Grip must be vertical:
Fit the cap – marks on tank cap and
N
oil tank must line up.
Press the cap down as far as stop.
N
HT