Dimmer Curves; Service Menu - Cameo OPUS S5 Manual De Usuario

Pan/Tilt Configures the device head
B.O. Moving Automatic blackout when
head moves
Fan Fan control

DIMMER CURVES

linear
DMX value

SERVICE MENU

Starting from the main display, press ENTER to go to the main menu. Use the UP and DOWN control keys to select the Service menu and
press ENTER.
This will take you to the submenu for adjusting the submenu options (select via UP and DOWN, confirm via ENTER, change value via LEFT
and RIGHT, confirm via ENTER).
Calibrate - Calibrate the components with values of 000 to 255 (Password 050).
Test Manual - Manually test the components with values of 000 to 255.
Reset Motor - Reset the motors. All = All motors, Pan&Tilt = pan and tilt motors, Head Only = motors in device head.
USB Update - Firmware update via USB interface. OFF = Stop firmware update via USB interface. ON = Allow firmware update via USB interface.
Factory Reset - Reset to factory settings.
12
Pan Reverse
Tilt Reverse
Pan Angle
Feedback
OFF
ON
Head Fan
Base Fan
exponential logarithmic
DMX value DMX value
OFF Pan movement direction does not reverse
ON Pan movement direction reverses
OFF Tilt movement direction does not reverse
ON Tilt movement direction reverses
630 Pan angle 630°
540 Pan angle 540°
OFF Automatic position correction deactivated
ON Automatic position correction activated
No blackout when head moves
Blackout when head moves
Auto The fan speed will adjust automatically to the
temperature of the device head
Low Consistently low fan speed with reduced
brightness, as required
Auto The fan speed will adjust automatically to the
temperature of the device base
Low Consistently low fan speed with reduced
brightness, as required
S-curve
DMX value