Description Of The Monitor And The Controls - Eneo VMC-10.4LED-CP Instrucciones De Montaje

4. Description of the Monitor and the Controls

1 2 3 4
Front side
1. MODE
AV/S-VIDEO/PC (RGB) selection function. Press the mode button to be appeared source select OSD box and press
the button or mode button repeatedly, press the menu button or wait 3 seconds to select highlighted
source.
2. Menu
Button to Setup Screen and Function
3. DOWN
Select the sub menu, decrease the selected function, hot key for volume down.
4. UP
Select the sub menu, increase the selected function, hot key for volume up.
5. POWER
ON/OFF button
6. Remote Sensor Window
Sensor for receiving signal from the remote control
5 6
19