User Controls; Rgb (& Dvr) Mode - Eneo VMC-17LCD-HMPG1 Instrucciones De Montaje

5. User Controls

5.1 RGB (& DVR) Mode
RGB Mode: General PC input mode
DVR Mode: The optimized format to synchronize a monitor and a DVR for the best resolution
NTSC: 640x480 (60Hz), 67x480 (60Hz)
PAL: 67x580 (50Hz), 800x600 (75Hz)
Main menu
Volume
Contrast
Brightness
Sharpness
Advanced
PIP
Color Temp
OSD Menu
Source
• Volume, Contrast, Brightness, Sharpness
Change the Volume, Contrast, Brightness & Sharpness according to personal preference.
• Advanced Menu
Advanced
Auto Adjustment
H Position
V Position
Phase
Clock
Recall
• PIP Menu
OSD Menu
Mode
Size
Position
Source
Select one of the options using or , followed by Enter.
Adjust the chosen item using or .
0
+58
Exit from item by pressing menu.
+64
+6
RGB
Auto Adjustment choose Automatically the proper H/V POS, H/V SIZE,
and the screen image
H Position is used to adjust the horizontal position of the image on the
0
screen.
0
0
V Position is used to adjust the vertical position of the image on the
0
screen.
No
Phase is adjust the focus of screen's image.
Clock is adjust the horizontal size of screen's image.
Recall the monitor original factory setting
Mode choose ON/OFF multi window activate or cancel the PIP function
Size select the PIP display size (Small / Medium / Large / PBP)
ON
Small Position is used to adjust the PiP display position.
POS
(L-UP, R-UP, R-Down, L-Down)
CVBS
Source is select the PiP source (CVBS, CVBS, SVIDEO)
Main picture
VGA/DVR
Sub picture
CVBS,CVBS,SVIDEO
0