Sanding Pad Brake; Cleaning The Extraction Channels; Accessories; Environment - Festool ETS EC 150/3 A EQ Manual De Instrucciones

Ocultar thumbs Ver también para ETS EC 150/3 A EQ:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5
Use only original Festool accessories and Festool
consumable material intended for this machine be-
cause these components are designed specifically
for the machine. Using accessories and consum-
able material from other suppliers will most likely
affect the quality of your working results and limit
any warranty claims. Machine wear or your own
personal workload may increase depending on the
application. Protect yourself and your machine, and
preserve your warranty claims by always using
Do not dispose of the device together with domes-
tic waste! Dispose of machines, accessories and
Garantie 1 + 2
Festool offers a 3 year limited warranty, one of the
strongest in the industry. This warranty is valid on
the pre-condition that the tool is used and operated
in compliance with the Festool operating instruc-
tions. Festool warrants that the specified tool will
14
The rubber sleeve [5-2] brushes off the sanding
pad and prevents uncontrolled turning of the sand-
ing pad. This must be replaced if the braking effect
decreases.
We recommend cleaning the extraction channels in
the machine [5-1] roughly once a week (particular-
ly if sanding synthetic resin, in the case of wet sand-
ing and if sanding plaster) using a small flat brush
or a cloth.
5-1
5-2

Accessories

original Festool accessories and Festool consum-
able material!
Only use original Festool sanding and polishing
pads. Low-quality sanding and polishing pads may
cause serious machine imbalance that decreases
the quality of the working results and increases
machine wear.
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".

Environment

packaging at an environmentally responsible recy-
cling centre. Observe the valid national regulations.

Warranty

be free from defects in materials and workmanship
for a term of 3 years from the date of purchase.
Conditions of 1 + 2 warranty
All customers receive a free extended limited war-
ranty (1 year + 2 years = 3 Years) on new Festool
power tools purchased from an authorized retailer.
Festool is responsible for all shipping costs during

Sanding pad brake

Cleaning the extraction channels

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ets ec 150/5 a eq

Tabla de contenido