Test Sewing; Setting Foot Pressure; Controlling Sewing Speed; Waste Tray - Janome 1100D Professional Manual De Instrucciones

SECTION IV

Test Sewing

Setting Foot Pressure

The standard setting is position 5. Turn the dial to
increase or decrease the foot pressure as needed
depending on the type of fabric.
There are six positions.

Controlling Sewing Speed

Sewing speed can be varied with the foot control. The
harder you press on the foot control, the faster the
machine runs.

Waste Tray

Attach the waste tray to the front cover. The tray will
catch fabric scraps that are cut off.
46