Friendly Name; Parental Lock Setup; Turn On/Off The Parental Lock; Changing The Password - Pioneer X-SMC5-K Manual De Instrucciones

Changing the settings

Friendly Name

1 Press SET UP.
2 Select Network Setting
Use /// to enter Friendly Name,
3
then press ENTER.
• /: Moves the adjusting digit.
• /: Changes displayed character.
• SOUND: Switches character types.
• CLEAR: Deletes one characters at a time.

Parental lock setup

Restrict internet radio access for children. When Internet
Parental Lock is set to On, you cannot listen to internet radio
without entering a password.

Turn on/off the parental lock

1 Press SET UP.
The Initial Setup screen is displayed on the main display.
2 Select Option Setting

Lock Internet Parental Lock.
Use /// or number buttons to enter
3
the password, then press ENTER.
• /: Moves the adjusting digit.
• /: Increases or decreases numbers.
• CLEAR: Deletes one characters at a time
• The factory default setting is
Use / to select On or Off, then press
4
ENTER.

Changing the password

1 Press SET UP.
The Initial Setup screen is displayed on the main display.
2 Select Option Setting

Lock Change Password.
Use /// or number buttons to enter
3
the current password, then press ENTER.
Use /// or number buttons to enter
4
the new password, then press ENTER.
• If you press RETURN, the previous screen will be
displayed.
Note
1 Even if Internet Parental Lock is set to On, automatic clock adjustments using network will work.

Friendly Name.
1

Internet Parental
"
0000".

Internet Parental

Software Update

Use this procedure to update the unit's software. You can
update the software via a USB storage device.
Updating via a USB storage device is performed by
downloading the update file from a computer, reading this file
onto a USB storage device then inserting the USB storage
device into the USB port on the unit's front panel.
• If an update file is provided on the Pioneer website,
download it onto your computer. When downloading an
update file from the Pioneer website onto your
computer, the file will be in ZIP format. Unzip the ZIP file
before saving it on the USB storage device. If there are
any old downloaded files or downloaded files for other
models on the USB storage device, delete them.
Important
• DO NOT unplug the power cord during updating.
• When updating via a USB storage device, do not
disconnect the USB storage device.
Press FUNCTION / to select USB as the
1
input source.
USB is shown on the main display.
2 Press SET UP.
The Initial Setup screen is displayed on the main display.
3 Select Option Setting
Start, then press ENTER.
Software Update
Start
Cancel
4 To update, select OK.
The updating screen appears and updating starts.
• The power turns off automatically once updating is
completed.

Software Update messages

Status
Description
messages
File Not Found. No update file was found on the USB storage
device. Store the file in the USB storage
device's root directory.
 
Software Update
13
39
En