Music Server; Introduction; About Playable Dlna Network Devices; Using Airplay On Ipod Touch, Iphone, Ipad And - Pioneer X-SMC5-K Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Music server

Chapter 10:
Music server
This unit can play audio files stored on PCs or other
components on a Local Area Network (LAN).

Introduction

This unit allows you to listen to audio files on a computer or
other component connected to the unit via LAN interface.
This chapter describes the setup and playback procedures
required to enjoy these features. It is advisory that you also
refer to the operation manual supplied with your network
component.
• Photo or video files cannot be played back.
• With Windows Media Player 11 or Windows Media
Player 12, you can even play back copyrighted audio files
on this unit.

About playable DLNA network devices

This unit allows you to play music on media servers
connected on an identical Local Area Network (LAN) as the
unit. This unit allows you to play files stored on the following
devices:
• PCs running Microsoft Windows Vista or XP with
Windows Media Player 11 installed
• PCs running Microsoft Windows 7 with Windows Media
Player 12 installed
• DLNA-compatible digital media servers (on PCs or other
components)
Files stored in a PC or DMS (Digital Media Server) as
described above can be played via command from an external
Digital Media Controller (DMC). Devices controlled by this
DMC to play files are called DMRs (Digital Media Renderers).
This unit supports this DMR function.
When this unit is selected as a DMR and DMS playback is
begun, the unit's input automatically switches to DMR.
During DMR input, the currently playing track name, artist
name, album name, and album art will appear on the unit's
main display (some information may not be displayed,
depending on the file being played).
When in the DMR mode, such operations as playing and
stopping files can be performed from the external controller.
Volume adjustment and the muting control are also possible.
If the FUNCTION / buttons are pressed during DMR
playback, the DMR playback will stop and the unit will revert
to the input function selected prior to DMR playback.
• Depending on the external controller being used,
playback may be interrupted when the volume is
adjusted from the controller. In this case, adjust the
volume from the unit or remote control.
Note
1 For more information, see the Apple website (http://www.apple.com).
2 The main display will not show the Play Status, Repeat, or Shuffle icons.
3 It may not be displayed other than song name.

Using AirPlay on iPod touch, iPhone, iPad and

iTunes

This unit supports AirPlay audio streaming from iPod touch
(2nd, 3rd and 4th generations), iPhone 4, iPhone 3GS, iPad
with iOS 4.2 or later, and iTunes 10.1 (Mac and PC) or later.
To use AirPlay, select your unit on your iPod touch, iPhone,
iPad or in iTunes and start playback.
Input to the unit will switch automatically when AirPlay is in
use.
The following operations can be performed when in AirPlay
mode:
• Adjustment of the unit's volume from iPod touch,
iPhone, iPad or iTunes.
• Pause/resume, next/previous track, and shuffle/repeat
from the remote control of the unit.
• Display of the currently playing track information on the
unit's main display, including artist, song/album name
3
and album artwork.
• If the FUNCTION / buttons are pressed during
AirPlay playback, the AirPlay playback will stop and the
unit will revert to the input function selected prior to
AirPlay.
Tip
• A network environment is required to use AirPlay.
• The unit's name that shows up in the AirPlay UI on iPod
touch, iPhone, iPad and iTunes can be changed by
Friendly Name from Network Setting.
• AirPlay provided on this unit has been developed and
tested based on the software versions for the iPod touch,
iPhone, iPad and the software versions for iTunes that
are indicated on the Pioneer website. AirPlay may not be
compatible with iPod touch, iPhone, iPad or iTunes
software versions other than those indicated on the
Pioneer website.

About the DHCP server function

To play back audio files stored on components on the
network, you must turn on the DHCP server function of your
router.
In case your router does not have the built-in DHCP server
function, it is necessary to set up the network manually.
Otherwise, you cannot play back audio files stored on
components on the network or listen to Internet radio
stations. See Network setting on page 36 for more on this.
10
1
2
27
En

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

X-smc5-s

Tabla de contenido