Tuner; Tuner Basic Operation; Presetting Stations; Tuner Setup - JVC KW-M150BT Manual De Instrucciones

Tuner

Tuner

Tuner Basic Operation

1
Press the < > button.
2
Touch [Tuner].
Ñ Source control screen
2
3
1 Displays the information of the current station:
PS name, Frequency, PTY Genre, Indicator Items
2 [FM] : Switches the FM band.
"FM1", "FM2", "FM3"
[AM] : Switches the AM band.
"AM1", "AM2"
[E] [F] : Tunes in a station with good
reception automatically.
[ ] : Displays the Tuner Setup screen. (P.5)
3 Recalls the memorized station.
When touched for 2 seconds, stores the current
receiving station in memory.

Presetting stations

Ñ Auto memory
You can preset 6 stations for the current band (FM1/
FM2/FM3/AM1/AM2).
1
Touch [FM] or [AM] to select the band.
2
Touch [ ].
3
Touch [Auto Store].
The local stations with the strongest signals are
found and stored automatically.
Ñ Manual memory
You can store the current receiving station in
memory.
1
Tune in to a station you want to preset.
2
Touch and hold [#] (#:1-6) in which you want to
store the station.
Ñ Recalling the preset station
1
Touch [#] (#:1-6).

Tuner Setup

1
Touch [
2
Set each item as follows.
1
[Auto Store]
Automatically searches and stores the 6 stations with
the strongest signals for the selected band.
"Auto Store" appears.
[Area]
"N.America" (Default): For North/Central/South
America, AM/FM intervals: 10 kHz/200 kHz.
"S.America": For some South American countries,
AM/FM intervals: 10 kHz/50 kHz.
"Europe": For Europe, AM/FM intervals: 9 kHz/50
kHz.
[Local Seek]
Tunes in only to the stations with sufficient signal
strength. (LOC indicator lights up.)
"ON", "OFF" (Default)
[RDS Clock Sync] *
Synchronizing the Radio Data System station time
data and this unit's clock.
"ON" (Default), "OFF"
[RDS] * *
2 3
Displays the RDS Settings screen.
*1 To use the function, it is necessary to set [Area] to
[N.America]/[S.America].
*2 To use the function, it is necessary to set [Area]
to [Europe].
*3 FM only
3
Touch [6].
].
*
1 3
English |
5