Lenco Concerto DIR-2000 Manual Del Usuario página 11

Once you have successfully set up the network, the device will automatically
connect to the network the next time when you turn the device on again. In
case you would like to change the network, enter System
the corresponding connection. You may refer to Section 5.2.1 and 5.2.3 for
details.
STANDBY/MODE STANDBY/MODE
Press the STANDBY/MODE STANDBY/MODE on the device or
enter the operation mode, and press again to enter the standby mode.
Time, date and any active alarm times will be displayed on the screen.
Press /
the device to adjust the volume. If you wish to switch the sound off,
press , press again to resume audio listening.
Music Sharing from
Music Music Music Sharing Sharing from Sharing from PC from
To share music files from your PC, follow the steps below:
•
- Connect the PC to the network.
- Ensure the device is powered on and connected to the same
network.
Open the UPnP platform Windows
-
later). Alternatively, other platforms or server such as Windows
Media Media
Media Media Connection
The following is an example of setting up with the Windows XP and Windows
Media Player 11.
on the remote control or rotate the volume control on
PC PC
PC
Connection Connection
Connection may be used.
System
System Setting System
Windows Media
Windows Media Windows Media Player Media
11
Setting
Setting Setting to configure
on the remote control to
Player
Player Player (version 11 or
Windows Windows
Windows