Lenco Concerto DIR-2000 Manual Del Usuario página 13

Time/date
•
Display format
Select 12 or 24 as your desired time format.
Auto-update
The time and date can be updated manually or automatically
from DAB, FM or network. Auto-update is available in DAB, FM or
Internet mode. The time will only be updated when in a
corresponding mode, so it is best to select a mode that you use
regularly.
DAB+ and FM use time signals broadcast with radio
transmissions. The network uses a time signal sent from the
Internet radio portal in any network-connected mode.
For Network setting only
Time zone, daylight
Set your time zone (default time zone GMT +1:00). Turn on
the Daylight savings option if daylight saving is in effect in your
country.
Manual update
If you select No update, the wizard prompts you to set the
time and date manually. The date and time are displayed as
dd-mm-yyyy and hh:mm.
The adjustable digit will flash. Adjust each digit with the
Navigation Control on the device or up/down on the remote control.
Once the digit is set, press the reel on the device or press
on the remote control to continue.
Network
•
13