Lenco Concerto DIR-2000 Manual Del Usuario página 32

5.8.2 Now playing information
While the stream is playing, the screen shows its frequency, or if RDS
information is available, station name and any further RDS
information such as program name, track title and contact details will
also be shown. Stereo broadcasts are indicated with an icon at the
top of the screen. To view further information about the broadcast,
MENU/INFO MENU/INFO
press MENU/INFO MENU/INFO on the device or INFO
Each time you press INFO
which is cycling through RDS text, further RDS text (station/program
type), frequency and today's date.
5.8.3 Settings
•
•
5.9 5.9 Bluetooth Bluetooth
5.9 5.9 Bluetooth Bluetooth
When you go to the Bluetooth mode, it is under pairing (the BT icon on the
bottom is flashing). You can turn on your smart phone/ tablet/ other
Bluetooth device for pairing. The Bluetooth pairing name is "Lenco Concerto".
NFO
NFO, another set of information is displayed, NFO
Scan settings
FM scans is default to stop at any available station. This
may result in a poor signal-to-noise ratio (hiss) from weak
stations. To change the scan settings to stop only at stations
with good signal strength, select Yes after choosing Strong
station only.
Audio settings
All stereo stations are reproduced in stations, this may
result in a poor signal-to-noise ratio (hiss). To play weak
stations in mono, select FM weak reception: Listen in mono
only and then YES.
INFO INFO
INFO on the remote control.
32