Lenco Concerto DIR-2000 Manual Del Usuario página 30

To remove stations that are listed but not unavailable, choose Prune
invalid.
Turn on the Navigation Control on the device to view a list of stations
and press OK to confirm. The screen will show information of the
selected station, track or shown as broadcast.
5.7.2 Presets
To store a DAB+ preset, press and hold PRESET on the device or
on the remote control until the display shows the Save preset screen
by pressing the OK key for a longer time. Select one of the 10 presets
to save the currently playing station.
To select a preset, press PRESET on the device or
control, then select one of the listed preset stations. When a preset
station is playing, it shows
screen.
You can store up to 10 of your favorite stations to the memory. This
will enable you to access your favorite stations 0-9 quickly and easily
by using the numbered buttons on the remote control.
5.7.3 Now playing information
While the stream is playing, the screen shows its name and DLS
(Dynamic Label Segment) information broadcast by the station and
the real-time information such as program name, track title and
contact details. Stereo broadcasts are indicated with an icon at the
top and bottom of the screen. To view further information, press
MENU/INFO MENU/INFO
MENU/INFO MENU/INFO on the device or INFO
Each time you press INFO
which are DLS text, program type, ensemble name/frequency, signal
strength/error rate, bite rate/codec/channels and today's date.
5.7.4 Settings
Dynamic range compression (DRC)
•
Allows you to compress the audio dynamic range (off/ low/
high), if you are listening to music with a high dynamic range in
a noisy environment.
n ( 1,
NFO NFO
NFO on the remote control.
NFO NFO
NFO, another set of information is displayed,
30
2 etc.) at the bottom of the
on the remote