VMB TL-075 Manual De Instrucciones página 6

Quick operation guide
ding to DIN 2394. Catches and pulleys of
ST-37 steel.
2.14 - Winch: 1200 Kg. maximum load
with automatic brake. Certification CE and
GS TÜV.
2.15 - Cable : Steel DIN 3060. Quality 180
2
Kg/mm twist resistant.
Cable diameter: Ø6 mm.
2.16 - Adjustable stabilizing feet with rub-
ber non-slip supports.
3. SAFETY PRECAUTIONS.
PRO LIFTS S.L.
2.17 - Safety catches to anchor the legs.
2.18 - Antirust protection, primed paint
with cured polyester dust cover. The tower
can be supplied with natural aluminium
finish or black (version B).
2.19 - Spirit level to adjust the tower ver-
tically.
2.20 - Swivel wheels to transport the lift
when folded.
3.1 - The TL-075 / TL-078 is a machine designed to
elevate loads upwards in a vertical direction, It should
NEVER be used as a platform to elevate people.
3.2 - Only place the lift on hard, flat surfaces always
checking that it is in a vertical position by using the bub-
ble level indicator (L) found on the base. Adjust the leg
stabilizers (Q) by turning the handles (H) to level if ne-
cessary. NEVER use wedges or other foreign objects to
balance the lift.
3.3 - The maximum load indicated on the characteristics
label and the instructions manual should not be excee-
ded.
3.4 - This lift should NEVER be used to elevate a load
that has not been properly checked. It is necessary to
verify that the load is correctly supported and centred
on the appropriate lift support so that the weight of the
load will only elevate in a vertical direction.
Depósito legal y copyright. Todos los derechos reservados.
ENGLISH
6