dirna Bergstrom bycool blue line FLAT RENAULT Instrucciones De Montaje página 30

FLAT
ES
EN
Mark and drill Ø 9 on the cab bearing in
18
mind the vertical position of the support.
Minimum (6) fastening drill holes.
Place M6 rivet nuts and fix the support with
19
M6/100x30 screws.
(*) – Where it does not lean on the even part,
place a 10mm separator and screw M6/100
x 40.
Fasten the tank pump unit with (2) sheet
20
metal screws 5.4x19 mm.
Rivet nut
30
Air conditioning for vehicles
Allen screw 6/100x30
Grower washer Ø 6
Flat washer Ø 6
Supports
Tank
6/100x30
Grower washer Ø 6
Flat washer Ø 8
Support
Rear part cab
6/100x40 (*)
10 mm separator (*)
Rear part cab (*)