Information Concerning The Operating Manual; Liability And Warranty; Safety; Explanation Of Symbols - Reflex Servitec S Manual De Instrucciones

Information concerning the operating manual

1 Information concerning the operating manual
This operating manual is an important aid for ensuring the safe and reliable functioning of the device.
The operating manual will help you to:
• avoid any risks to personnel.
• become acquainted with the device.
• achieve optimal functioning.
• identify and rectify faults in good time.
Reflex Winkelmann GmbH accepts no liability for any damage resulting from failure to observe the information in this operating
manual. In addition to the requirements set out in this operating manual, national statutory regulations and provisions in the
country of installation must also be complied with (concerning accident prevention, environment protection, safe and professional
work practices, etc.).
 Note!
Every person installing this equipment or performing any other work at the equipment is required to carefully read
this operating manual prior to commencing work and to comply with its instructions. The manual is to be provided to
the device operator and must be stored near the device for access at any time.
2

Liability and warranty

The device has been built according to the state of the art and recognised safety rules. Nevertheless, its use can pose a risk to life
and limb of personnel or third persons as well as cause damage to the system or other property.
It is not permitted to make any modifications at the device, such as to the hydraulic system or the circuitry.
The manufacturer shall not be liable nor shall any warranty be honoured if the cause of any claim results from one or more of the
following causes:
• Improper use of the device.
• Unprofessional commissioning, operation, service, maintenance, repair or installation of the device.
• Failure to observe the safety information in this operating manual.
• Operation of the device with defective or improperly installed safety/protective equipment.
• Opening the housing of the electrical controller.
• Failure to perform maintenance and inspection work according to schedule.
• Use of unapproved spare parts or accessories.
Prerequisite for any warranty claims is the professional installation and commissioning of the device.
 Note!
Arrange for specialist personnel to carry out commissioning and annual maintenance.
3

Safety

3.1

Explanation of symbols

The following symbols and signal words are used in this operating manual.
DANGER
Danger of death and/or serious damage to health
• The sign, in combination with the signal word 'Danger', indicates imminent danger; failure to observe the safety
information will result in death or severe (irreversible) injuries.
4 — English
•
•
•
•
Vacuum spray degassing — 20.05.2019
avoid any faults due to improper operation.
cut down on repair costs and reduce the number of
downtimes.
improve the reliability and increase the service life of
the device.
avoid causing harm to the environment.