Description Of The Device - Reflex Servitec S Manual De Instrucciones

CAUTION
Risk of injury due to heavy device weight
The device weight may cause physical injury or accidents.
• If necessary, work with a second person during assembly or disassembly.
ATTENTION
Device damage during transport
If the device is not transported correctly, it may be damaged.
• Use suitable covers to protect the connections against damage.
4

Description of the device

The device is a degassing and make-up station. Its main areas of application are heating and cooling circuits and systems in which
interruptions of operations due to dissolved or free gases. The device works only with a vacuum pump designed for this purpose.
This design enables a compact footprint for small and mid-sized systems.
The device provides the following safety features:
• No direct intake of air thanks to a regulation of the pressure maintenance with automatic make-up.
• No circulation issues caused by free bubbles in the circuit water.
• Reduced corrosion damage due to oxygen removal from fill and make-up water.
4.1 Overview
1 Connection, WC make-up line
2 Controller
3 Pipe connection DC system-side
4 air vent
5 Check valve at the air vent
6 Nameplate
7 Dirt trap
Vacuum spray degassing — 20.05.2019
Description of the device
8 Integrated filter insert in the system-side
connection valve
9 Pipe connection DC outlet-side
10 Motorized ball valve system-side
11 Pump
12 Spray tube
13 Pressure sensor
14 Motorized ball valve make-up side
English — 7