Removing The Rear Wheel; Reinstalling The Rear Wheel - SHERCO 250-300 SE/R 2013 Manual Del Propietário

reMOving THe rear WHeel

2 1
3

reinsTalling THe rear WHeel

1
2
All manuals and user guides at all-guides.com
Place the motorcycle on a suitable stand.
- Unscrew the nut
- Tap the axle
- Remove the axle.
- Move the wheel as far forward as possible.
- Remove the chain and wheel.
Do not operate the rear brake pedal when the rear
wheel is removed.
Check that the brake disc is not dirty or
contaminated with oil or grease. If it is, clean the
disc with brake cleaner.
Brake cleaner
Install the two spacers
they are positioned correctly.
and remove the adjuster.
1
out using a nylon hammer.
3
aTTenTiOn
Minerva brake cleaner
and
1
2
and degreaser
and make sure
2
111