Getting To Know Your Device; Device Description - Beurer ELLE MPE 58 Manual De Instrucciones

• Only use light sources of the prescribed type. Failure to comply will invalidate the warranty.
• Protect the device from impacts, humidity, dirt, chemicals, marked temperature fluctuations and direct sunlight.
• Never place any objects on the device. Do not cover the device while it is in operation.
• Repairs must only be carried out by Customer Services or authorised suppliers. Failure to comply will invalidate
the warranty.
• Keep sensitive areas of skin such as scars and tattoos away from radiation.
• Never use the device near open flames or hot surfaces.
• Never pull the mains plug out of the socket using the mains cable or with wet hands.
• Do not use the device if it is visibly damaged, does not function properly or if the mains plug or mains cable is
damaged. In these cases, contact Customer Services.
• The device is not intended for use by people (including children) with restricted physical, sensory or mental skills or
a lack of experience and/or a lack of knowledge, unless they are supervised by a person who has responsibility for
their safety or they receive instructions from this person on how to use the device. Children must not play with the
device. Cleaning and user maintenance must not be performed by children unless supervised.

1. Getting to know your device

The UV nail dryer MPE 58 combines the benefits of a UV light drying device and a nail dryer.
With the UV nail dryer MPE 58 you can dry the gel nail modelling on your fingernails and toenails or dry your var-
nished fingernails and toenails.
The special tunnel-like structure of the device and its reflecting foil incorporated into the interior help to ensure clean
and even drying of the nails. To make cleaning and disinfection more efficient and more comfortable, the UV nail
dryer is equipped with a removable base plate. This also helps to simplify the installation and replacement of the
fluorescent tubes.
To dry your fingernails/toenails, you can choose between three different UV treatment times (90 second timer, 120
second timer, continuous operation).

2. Device description

1. Removable base plate
2. Outer cover
3. Control panel
Control panel
1. ON/OFF button
2. Dryer button
3. UV light button
4. "Dryer" operating display
5. "UV light 90 second timer" operating display
6. "UV light 120 second timer" operating display
7. "UV light continuous operation" operating display
3
2
1
8
1 2
4 5
3
6 7