smartheart 01-540 Serie Manual De Instrucciones página 13

TAKING YOUR MEASUREMENTS
6. When the measurement is complete, your blood
pressure measurement and pulse will display
separately on the screen alternating repeatedly every
2-3 seconds, Fig 4. The systolic and diastolic
readings will display at the same time.
7. The Hypertension Indicator will indicate your reading
range in the right side of the display, Fig 5. See page
14 for a chart interpreting the Hypertension Indicator
results.
8. If an irregular heartbeat was detected during the
reading, the Irregular Heartbeat Detector icon
will appear flashing on the display for both the
measurement results and pulse results screens, Fig 6.
See page 13 for more information on the Irregular
Heartbeat Detector feature.
9. The reading will automatically be stored in memory,
up to 60 readings.
10.Select START to turn the unit off and conserve energy
and battery life. The unit will automatically shut-off
and revert to time/date mode after approximately 1
minute.
Systolic/Diastolic Results
Pulse Results
Fig. 4
Fig. 5
Fig. 6
ENGLISH • 13