Operation Note - Nokia 3155 Manual Del Usuario

O r g a n i z e r
Lap timing—You can use the lap time function when you want to track how
long it takes to complete each cycle or lap. Select
The clock stops, then starts immediately from zero. The lap time appears
below the running time. Each time you select Lap, the new measured time
appears at the beginning of the list.
2. Select Stop to end the timing and display the total time or
Start or Reset to continue or reset timing.
Lap and split times
To save a time while the clock is running, select
measurement, and select OK. If you do not enter a name, the total time is used as
the default title for the lap or split time.
To view a saved time, in the standby mode, select
Show last time or View
To delete a saved time from Stopwatch, select
and select Delete > Yes; or select

Operation note

If you press the end key and return to the standby mode, the clock continues to
run in the background, and
To return to the stopwatch screens, in the standby mode, select
Stopwatch > Continue. To stop the clock, select Stop.
Options
You can choose the following options when you use the stopwatch:
Continue—Appears when the stopwatch is working in the background.
Show last time— Appears when you have saved a split or lap time and displays the
last time saved.
Split timing—Asks if you want to discontinue previous timing.
Lap timing—Asks if you want to discontinue previous timing.
View times—Enables you to browse the saved times.
Delete times—Enables you to delete any saved times. You can delete the saved
times one by one or all at once.
74
times.
Delete times
appears in the upper left corner.
Lap to note the lap time.
Stop
Stop > Save, enter a name for the
Menu > Organizer
View times and the time to delete,
> One by one or Delete
Menu
> Options >
> Stopwatch >
all.
> Organizer >