Maytag MTW5707TQ0 Manual De Uso Y Cuidado página 8

2,
3,
Remove power plug and yellow strap from machine base to release the rear leveling
system.
/
Firmly grasp the power cord and pull to completely remove the power cord, cord
restraint, and pin from the rear panel.
Confirm that the power cord restraint (A), and pin (B) are removed.
Looped power cord
Looped power cord
Firmly grasp the yellow shipping strap and pull until both ends are completely removed
from washer.
4,
A
B
A. Power cord restraint
B. Pin
fb remove the power cord from the cord restraint, push the power cord in, press TAB, and
then pull the power cord out.
2. Check that two (2) cotter pins were removed with the shipping strap.
8