Protocolo Dnp 3.0; Device Profile Document - Fanox SIL-V Manual De Usuario

11. PROTOCOLO DNP 3.0

11.1. Device profile document

DNP V3.00
DEVICE PROFILE DOCUMENT
This document must be accompanied by : Implementation Table and Point List.
Vendor Name:
SIL-V
Device Name:
Highest DNP Level Supported:
For Requests
For Responses
Notable objects, functions, and/or qualifiers supported in addition to the Highest DNP
Levels Supported (the complete list is described in the attached table):
For static (non-change-event) object requests, request qualifier codes 07 and 08 (limited
quantity), and 17 and 28 (index) are supported. Static object requests sent with qualifiers
07, or 08, will be responded with qualifiers 00 or 01.
16-bit, 32-bit and Floating Point Analog Change Events with Time may be requested.
Maximum Data
(octets):
Transmitted _____292______
Received _____292______
Maximum Data Link Re-tries:
None
Fixed at ____________________
Configurable, from _0_ to _255_
Default, 3
Requires Data Link Layer Confirmation:
 Never
 Always
 Sometimes. If 'Sometimes', when? ____________________________________________
 Configurable as Never, Only for multi-frame messages, or Always. Default Never
Requires Application Layer Confirmation:
 Never
www.fanox.com
FANOX Electronic, S.L.
2
2
Link Frame Size
Rev.07
Device Function:
 Master  Slave
Maximum Application
(octets):
Transmitted ___2048___
Received ___2048___
Maximum Application Layer Re-tries:
None
Configurable
195/212
Fragment Size