Configuration And Use Of Fp122; Standard Configuration Of Fp122; Connecting Diagram With The Standard Configuration - CESVA FP122 Manual Del Usuario

Configuration and use of FP122

The FP122 sound source can reproduce the noise generated by its own or
signals form other equipment.

4.1 Standard configuration of FP122

The standard configuration of the FP122 consists in reproducing with the BP012
loudspeaker the signal generated, equalized and amplified by the AP602.

4.1.1 Connecting diagram with the standard configuration

NOTE:

Always connect the equipment with the equipment turned off and consult
the chapter 8 about safety measures and advice.
1) Connect the AP602 and the BP012 with the Speakon-Speakon cable CN012.
In the AP602 you should connect the cable into the Speaker connector [24]
and in the BP012 side in the Speakon connector [2].
2) Connect the AP602 to the mains with the mains cable through mains
connector [13].
AP602
50
4. Configuration and use of FP122
CN012
Chapter 4
4
Configuration and use of FP122
BP012
TR012