Technical Specifications; Ap602; General Features; Inputs And Outputs - CESVA FP122 Manual Del Usuario

This chapter contains the technical specifications of the sound source

7.1 AP602

7.1.1 General Features

MAXIMUM OUTPUT`POWER:
(Pink noise filtered between 50 and 5000 Hz 1/3 octave
bands)
FREQUENCY RESPONSE (± 0,15 dB)
(1 dB below the nominal power and 8  load )
TYPICAL TOTAL HAMONIC DISTORTION (THD)
(3 dB below the nominal power, 20 Hz – 20 kHz and 8 
load )
SIGNAL TO NOISE RATIO SNR
(A Weighting, 20 Hz – 20 kHz and 8  load )
DAMPING FACTOR < 1 kHz @ 8 
TYPICAL POWER CONSUMTION
MAINS:
DIMENSIONS (including transport case)
WEIGHT (including transport case)
IP (equipment switched off and case closed)

7.1.2 Inputs and outputs

LOUDSPEAKER SIGNAL OUTPUT [24]:
CONNECTOR
ALLOWED IMPEDANCES
60

Technical specifications

7. Technical specifications
7
FP122:
6 : 580 W
20 – 20000 Hz
< 0.05 %
> 119 dB
> 1000
6 A
(580 VA)
120/230 ~ VAC
50/60 Hz
350 x 300 x 150 mm
4.750 kg
IP67
Speakon© of 4 pins (+1, -1)
between 6 and 8 
Chapter 7 Technical specifications