Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LINE SIGNAL OUTPUT [18]:
CONNECTOR
OUTPUT TYPICAL PEAK TO PEAK VOLTAGE
OUTPUT IMPEDANCE
LINE SIGNAL INPUT [20]:
CONNECTOR
MAXIMUM PEAK TO PEAK VOLTAGE
MAXIMUM RMS VOLTAGE @ 1kHz
TYPICAL INPUT IMPEDANCE
USB PORT [21]:
TYPE
CONNECTOR
CONNEXION CABLE
WIRELESS COMMUNICATION:
TYPE
TRANSMISSION FREQUENCY
COVERAGE RANGE
COMUNICACIÓN MANDO A DISTANCIA MA001:
TYPE
TRANSMISSION FREQUENCY
COVERAGE RANGE (with antenna)
REMOTE CONTROL BATTERY TYPE
REMOTE CONTROL DIMENSIONS
REMOTE CONTROL WEIGHT
7.1.3 Indicators and Protections
PROTECTION INDICATOR
CLIPPING LIMITATION INDICATOR
FUSE: 6AF
Chapter 7
Technical specifications
PINK NOISE
BAND LIMITED PINK NOISE
WHITE NOISE
Male XLR. Unbalanced signal: Pin 1: ground.
Pin 2: direct signal Hot. Pin 3:
Female XLR. Unbalanced signal: Pin 1:
ground. Pin 2: direct signal Hot. Pin 3:
10000
Digital complies with USB rev. 2.0
2402 to 2480 GHz
433.92 MHz
55 x 32 x 13 mm
Appears when an internal protection is active:
Temperature, overload, etc. It may also appear
momentarily when switching on the equipment.
Appears when exceeding the maximum peak
voltage or current at the amplifier output and
the AP602 applies the clipping limitation. It can
momentarily appear when switching on the
equipment, during its stabilization.
Free.
2 V
3.5 V
3 V
100
Free.
3.6 V
0.3 V
USB type B
CN2US
Bluetooth class 1
80 m
Radiofrequency
45 m
A23 type
19 g (w batt.)
Fuse protection.
61
Publicidad
Capítulos
Tabla de contenido
