Remote Control; Remote Control With Ma001 - CESVA FP122 Manual Del Usuario

The FP122 can be controlled via the keyboard of AP602 and also through the
following methods:

Control with the MA001 remote control: It allows you to remotely start and
stop playback of the noise with just pressing one button. It has a coverage
range of 30 m.

Control with a PC: Allows remote control of the AP602 from a computer with
the software SF600 (AP600 Remote Control) using one of the following
options:
o USB: Digital communication. Compliant with USB rev. 2.0.
o
Bluetooth: Class 1 wireless digital communication.

5.1 Remote control with MA001

The AP602 has the option to be remotely controlled (run/stop) with the MA001
remote control. This has two buttons. With the upper button (big one), you can
control the AP602 and with the lower button (small one) the MI005 (with the
option MD005).
To control the AP602 through the MA001 remote control the AN001 antenna
should be screwed into the antenna connector [18]. This antenna is foldable so
you can close the AP602 without removing it.
A single remote control simultaneously handles all noise sources with remote
control option that are fed, switched on and within the coverage range (45 m).
NOTA:

To replace the battery, remove the rear cover using a cross-head
screwdriver (Philips).
Chapter 5

Remote control

Remote control
AP602
MI005
5. Remote control
5
57