W-Dmx; W-Dmx™ Status - Cameo OPUS H5 Manual De Usuario

MAIN DISPLAY SLAVE AND STATIC MODE
The top line of the display shows whether a control signal is available on the device and the middle field shows the SLAVE or STATIC mode
with the selected scene (Run Scene x). The bottom line displays the device head temperature, lamp mode and W-DMX status. If the control
signal is interrupted in slave mode, the characters in the display start flashing and "None" is shown after "Controlled by" in the top line (no
signal); when the control signal is available again, the flashing stops.
Control signal display
Tap -> main menu
Operating mode
Temperature of the device head
The fields marked grey in the figure are control panels with direct access to the corresponding menu item.

W-DMX™

To pair a W-DMX receiver with a W-DMX compatible transmitter, the Reset command must be executed in the menu item WDMX under
Receiver (select and confirm Reset). The receiver is now in pairing standby and waiting for a pairing request from a transmitter. Start the
pairing by selecting Link in the menu of the transmitter and confirming; the pairing now takes place automatically. In the same way, several
receivers can be paired simultaneously or one after the other to a transmitter (e.g. for master/slave operation). A W-DMX connection is
always maintained until the connection is disconnected by means of the Reset command in the receiver or the Unlink command in the
transmitter, regardless of whether a device has been disconnected from the power supply in the meantime.
W-DMX™ STATUS
W-DMX W-DMX
deactivated activated as
receiver,
not paired
The following is a description of how to operate the spotlight using the rotary-push encoder and the BACK button next to the display.
10
Lamp mode
W-DMX W-DMX
activated activated as
as receiver receiver and as receiver
and paired, paired, no and paired,
transmitter DMX signal DMX signal
is switched
off or out of
range
Lamp – tap for direct access to menu item
Settings / Lamp
Warning triangle – the warning triangle is
displayed in the event of malfunction. Tap
for further information
W-DMX status
G3
W-DMX W-DMX W-DMX
activated activated as activated as
transmitter transmitter
with G3 with G4s
standard, standard,
available DMX signal DMX signal
available available
G3 G4S
G4S
W-DMX W-DMX
activated as activated as
transmitter transmitter
with G3 with G4s
standard, no standard, no
DMX signal DMX signal