Quicklight; Help Menu (Help) - Cameo OPUS H5 Manual De Usuario

QUICKLIGHT

Set up a scene quickly and easily using the basic Moving Head functions without an external controller. Starting from the main display, press
the rotary-push encoder to enter the main menu. Select Quicklight by turning the encoder and press the encoder to confirm. Now select
the desired menu item again by turning the encoder, pressing the encoder and setting the value from 000 to 255 as desired (change value
by turning, confirm by pressing, back with BACK).
If the Quicklight mode is activated, the display does not automatically change to the main display; when leaving the Quicklight menu, Quic-
klight mode is automatically terminated. The settings in the Quicklight menu are retained until the next restart of the spotlight; as a result,
Quicklight can be accessed repeatedly with the same settings as long as the spotlight remains switched on. After restart, the values in the
Quicklight settings are reset (PAN = 127, TILT = 127, DIMMER = 000, ZOOM = 127, FOCUS = 127).

HELP MENU (Help)

In the Help menu you will find three pages with 1. Information on quick commands that take you directly to specific menu items, 2.
Information on the division of the display into control panels in the main menu and sub-menus, and 3. Information about the device itself.
Starting from the main display, press the rotary-push encoder to enter the main menu. Select Help by turning the encoder and press the
encoder to confirm. Select the desired information again by turning the encoder.
19