Wps - Multilaser RE027 Manual Del Usuario

www.multilaser.com.br

4.4 WPS

This section will guide you to add a new wireless device to an existing network quickly by WPS (Wifi Protect Setup) function.
a) Choose menu "WPS", you will see the next screen (shown in Figure 4 3 ).
- WPS Status – Enable or disable the WPS function here.
- Current PIN – The current value of the Router's PIN is displayed here. The default PIN of the Router
can be found in the label or User Guide
- Restore PIN – Restore the PIN of the Router to its default.
- Gen New PIN – Click this button, and then you can get a new random value for the Router's PIN. You
can ensure the network security by generating a new PIN.
- Add Device – You can add a new device to the existing network manually by clicking this button.
b) To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between
wireless adapter and Router using either Push Button Configuration (PBC) method or PIN method.
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS
function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for example.
Figure 4-3: WPS
127